Urban Underground DSP – LICI-E-05 of 11

Stamps: Geared Up Garage, Be the Star.

Cardstock: Basic Gray, Black, Very Vanilla, silver foil, Urban Underground DSP (Occasions 2017).

Ink: Basic Gray, Black, Light Smoky Slate Blends.

Tools: Tombow adhesive, snail adhesive, glue dots, dimensionals, Black/Silver ¼” metallic ribbon (Occasions 2019), sequins, Subtle embossing folder, Urban Underground embellishments, metallic thread.

Punches/Dies: Garage Gears Thinlits dies, Stitched Shapes Framelits, Layering Circles Framelits, Stars Framelits.  Colored the car with the blends.

Use a strip from my Love It Chop It DSP stash.  Grunged my Basic Gray card with the puffs of smoke stamp image in Basic Gray ink.

This is card 5 of 11 using this Paper Share from the Occasions 2017 catalogue.  From the Urban Underground DSP Paper Share, I ended up with 5 sheets of 6x6 paper plus 2 half sheets (3x6) of black with brushed silver foil.  I have Loved It long enough, time to Chop It and use it thanks to Kylie Bertucci for sharing her method!

Stamps: Geared Up Garage, Be the Star.

Cardstock: Basic Gray, Black, Very Vanilla, silver foil, Urban Underground DSP (Occasions 2017).

Ink: Basic Gray, Black, Light Smoky Slate Blends.

Tools: Tombow adhesive, snail adhesive, glue dots, dimensionals, Black/Silver ¼” metallic ribbon (Occasions 2019), sequins, Subtle embossing folder, Urban Underground embellishments, metallic thread.

Punches/Dies: Garage Gears Thinlits dies, Stitched Shapes Framelits, Layering Circles Framelits, Stars Framelits.  Colored the car with the blends.

Use a strip from my Love It Chop It DSP stash.  Grunged my Basic Gray card with the puffs of smoke stamp image in Basic Gray ink.

This is card 5 of 11 using this Paper Share from the Occasions 2017 catalogue.  From the Urban Underground DSP Paper Share, I ended up with 5 sheets of 6x6 paper plus 2 half sheets (3x6) of black with brushed silver foil.  I have Loved It long enough, time to Chop It and use it thanks to Kylie Bertucci for sharing her method!

Negative and Positive Daisy – LICI-B -10

Stamps: Daisy Delight.

Cardstock: Very Vanilla, Everyday Enchantment DSP (SAB 2012), Peek a Boo Peach.

Ink: Peek a Boo Peach.

Tools: Stamparatus, bone folder, purchased envelope, sponge, dimensionals, Tombow adhesive, snail adhesive, regular and mini glue dots, Everyday Enchantment brad, sequins, Peek a Boo Peach ribbon, Pool Party ribbon, Subtle embossing folder.

Punches/Dies: Hollow Lace Border dies (Amazon), Silent Setter, small daisy punch, Daisy Punch.

Die cut two Hollow Lace Border dies (Amazon) from Peek a Boo Peach cardstock.  Adhere to the bottom of the Very Vanilla panel leaving a bit of a border.  Join the second die to fit across the panel as the die is only 3-3/4” long.

Used a full panel of DSP from my Love It Chop It pile (5-1/4” x 4”).  Cut in half about 2-5/8” x 4”.  Adhere one piece above the die on the Very Vanilla panel, add Peek a Boo Peach ribbon to cover the seam then adhere to a Peek a Boo Peach card.  Set aside.

Cut Very Vanilla 3-1/4” square.  Mark the center.  Stamp a daisy with Peek a Boo Peach ink.  Punch with the Daisy Punch.  Sponge the tips of the daisy with Peek a Boo Peach ink and set aside.  Run the panel through the Subtle EF.

Cut the other piece of DSP at 2-5/8”.  Adhere the square of DSP to the back of the negative daisy.  Trim close to the petals.  Sponge edges Peek a Boo Peach.  Adhere to a 3” square of Peek a Boo Peach cardstock.  Set aside.

Punch a hole in the center of the positive daisy with the 1/8” hole punch.  Align the positive daisy with the negative daisy panel.  Trace the circle on to the panel.  Punch with the Silent Setter.  Add dimensionals.  Insert brad and adhere to the card front.

Stamp a phrase to the inside.  Punch a couple of small daisies from the scrap of leftover DSP.  Adhere around the phrase.  Punch a couple of ¼” Peek a Boo Peach circles for the centers.

Stamp the front of an envelope.

I have loved and now chopped the entire package of my Everyday Enchantment DSP from 2012!  I chopped it in 5-1/4” strips then cut the strips into 4” pieces.  Kept the leftover strips too.  I cut the cardboard backing from the DSP to fit in a Full Wide Stamp case. I checked my ribbons to see what I had that matched and taped a small piece to the cardboard.  Stored all the chopped DSP in a Full Wide Stamp case.

Stamps: Daisy Delight.

Cardstock: Very Vanilla, Everyday Enchantment DSP (SAB 2012), Peek a Boo Peach.

Ink: Peek a Boo Peach.

Tools: Stamparatus, bone folder, purchased envelope, sponge, dimensionals, Tombow adhesive, snail adhesive, regular and mini glue dots, Everyday Enchantment brad, sequins, Peek a Boo Peach ribbon, Pool Party ribbon, Subtle embossing folder.

Punches/Dies: Hollow Lace Border dies (Amazon), Silent Setter, small daisy punch, Daisy Punch.

Die cut two Hollow Lace Border dies (Amazon) from Peek a Boo Peach cardstock.  Adhere to the bottom of the Very Vanilla panel leaving a bit of a border.  Join the second die to fit across the panel as the die is only 3-3/4” long.

Used a full panel of DSP from my Love It Chop It pile (5-1/4” x 4”).  Cut in half about 2-5/8” x 4”.  Adhere one piece above the die on the Very Vanilla panel, add Peek a Boo Peach ribbon to cover the seam then adhere to a Peek a Boo Peach card.  Set aside.

Cut Very Vanilla 3-1/4” square.  Mark the center.  Stamp a daisy with Peek a Boo Peach ink.  Punch with the Daisy Punch.  Sponge the tips of the daisy with Peek a Boo Peach ink and set aside.  Run the panel through the Subtle EF.

Cut the other piece of DSP at 2-5/8”.  Adhere the square of DSP to the back of the negative daisy.  Trim close to the petals.  Sponge edges Peek a Boo Peach.  Adhere to a 3” square of Peek a Boo Peach cardstock.  Set aside.

Punch a hole in the center of the positive daisy with the 1/8” hole punch.  Align the positive daisy with the negative daisy panel.  Trace the circle on to the panel.  Punch with the Silent Setter.  Add dimensionals.  Insert brad and adhere to the card front.

Stamp a phrase to the inside.  Punch a couple of small daisies from the scrap of leftover DSP.  Adhere around the phrase.  Punch a couple of ¼” Peek a Boo Peach circles for the centers.

Stamp the front of an envelope.

I have loved and now chopped the entire package of my Everyday Enchantment DSP from 2012!  I chopped it in 5-1/4” strips then cut the strips into 4” pieces.  Kept the leftover strips too.  I cut the cardboard backing from the DSP to fit in a Full Wide Stamp case. I checked my ribbons to see what I had that matched and taped a small piece to the cardboard.  Stored all the chopped DSP in a Full Wide Stamp case.

Petal Palette – LICI-B-08

I have loved and now chopped the entire package of my Everyday Enchantment DSP from 2012!  I chopped it in 5-1/4” strips then cut the strips into 4” pieces.  Kept the leftover strips too.  I cut the cardboard backing from the DSP to fit in a Full Wide Stamp case. I checked my ribbons to see what I had that matched and taped a small piece to the cardboard.  Stored all the chopped DSP in a Full Wide Stamp case.

Stamps: Waterfront, High Tide (inside), Petal Palette.

Cardstock: Poppy Parade, Lucky Limeade, Very Vanilla, Everyday Enchantment DSP (SAB 2012).

Ink: Poppy Parade, Soft Suede.

Tools: Stamparatus, bone folder, purchased envelope, sponge, dimensionals, Tombow adhesive, snail adhesive, regular and mini glue dots, pearls, Lucky Limeade ribbon, Subtle embossing folder.

Punches/Dies: Stitched Shapes Framelits, Petals and More Dies, Lace Ribbon die, Trio Flower punch.

Stamped the phrase on a Very Vanilla panel in Soft Suede ink then ran it through the Subtle EF.

The markers were too harsh, and the Poppy Parade Blends were too pink to color the bird so I inked the large water/mountain image from the Waterfront stamp set in Poppy Parade, stamped it off then stamped over the bird. 

I bought the Lace Ribbon die from a friend.  Once I die cut it, I did cut it in half before adhering it to one long edge of the DSP strip. 

Used an older punch to punch the flowers.  Added pearls to each one.

Stamp a phrase from the High Tide stamp set to the inside.  Stamp the front of the envelope.

I have loved and now chopped the entire package of my Everyday Enchantment DSP from 2012!  I chopped it in 5-1/4” strips then cut the strips into 4” pieces.  Kept the leftover strips too.  I cut the cardboard backing from the DSP to fit in a Full Wide Stamp case. I checked my ribbons to see what I had that matched and taped a small piece to the cardboard.  Stored all the chopped DSP in a Full Wide Stamp case.

Stamps: Waterfront, High Tide (inside), Petal Palette.

Cardstock: Poppy Parade, Lucky Limeade, Very Vanilla, Everyday Enchantment DSP (SAB 2012).

Ink: Poppy Parade, Soft Suede.

Tools: Stamparatus, bone folder, purchased envelope, sponge, dimensionals, Tombow adhesive, snail adhesive, regular and mini glue dots, pearls, Lucky Limeade ribbon, Subtle embossing folder.

Punches/Dies: Stitched Shapes Framelits, Petals and More Dies, Lace Ribbon die, Trio Flower punch.

Stamped the phrase on a Very Vanilla panel in Soft Suede ink then ran it through the Subtle EF.

The markers were too harsh, and the Poppy Parade Blends were too pink to color the bird so I inked the large water/mountain image from the Waterfront stamp set in Poppy Parade, stamped it off then stamped over the bird. 

I bought the Lace Ribbon die from a friend.  Once I die cut it, I did cut it in half before adhering it to one long edge of the DSP strip. 

Used an older punch to punch the flowers.  Added pearls to each one.

Stamp a phrase from the High Tide stamp set to the inside.  Stamp the front of the envelope.

Vintage Flower – LICI-B-02

Stamps: Happiest Birthday Wishes (Hostess 2011/12), Butterfly Basics (2017/18).

Cardstock: Very Vanilla, Calypso Coral, Pool Party, Everyday Enchantment DSP (SAB 2012)

Ink: Calypso Coral, Pool Party, Soft Suede.

Tools: Everyday Enchanted brad, Basic Pearls, Calypso Coral Ribbon, Stamparatus, bone folder, purchased envelope, sponge, dimensionals, Tombow adhesive, snail adhesive, regular and mini glue dots, Tufted embossing folder, Subtle embossing folder, spritzer, Silicone Craft Sheet.

Punches/Dies: Blossom Punch, Bitty Butterfly punch, Silent Setter, Butterflies Thinlits Die.

To make the flower, punch two flowers from Pool Party cardstock.

Punch a hole in the center of each flower using the silent setter.  Sponge flower edges on both sides with Soft Suede ink. 

Very lightly spritz the front and back of both flowers.  Roll into a tight ball.

Open flowers.  Some of the ink may bleed but that’s ok.  That is what gives it a vintage look. 

And of course, the inside phrase and an envelope!

I’m still working on the Everyday Enchantment DSP that I have loved and now chopped.  I chopped it in 5-1/4” strips then cut the strips into 4” pieces.  Kept the leftover strips too.  I have stored them in a Full Wide Stamp case.  Kylie Bertucci has given us permission to Love It Chop It. 

 

Stamps: Happiest Birthday Wishes (Hostess 2011/12), Butterfly Basics (2017/18).

Cardstock: Very Vanilla, Calypso Coral, Pool Party, Everyday Enchantment DSP (SAB 2012)

Ink: Calypso Coral, Pool Party, Soft Suede.

Tools: Everyday Enchanted brad, Basic Pearls, Calypso Coral Ribbon, Stamparatus, bone folder, purchased envelope, sponge, dimensionals, Tombow adhesive, snail adhesive, regular and mini glue dots, Tufted embossing folder, Subtle embossing folder, spritzer, Silicone Craft Sheet.

Punches/Dies: Blossom Punch, Bitty Butterfly punch, Silent Setter, Butterflies Thinlits Die.

To make the flower, punch two flowers from Pool Party cardstock.

Punch a hole in the center of each flower using the silent setter.  Sponge flower edges on both sides with Soft Suede ink. 

Very lightly spritz the front and back of both flowers.  Roll into a tight ball.

Open flowers.  Some of the ink may bleed but that’s ok.  That is what gives it a vintage look. 

And of course, the inside phrase and an envelope!

I’m still working on the Everyday Enchantment DSP that I have loved and now chopped.  I chopped it in 5-1/4” strips then cut the strips into 4” pieces.  Kept the leftover strips too.  I have stored them in a Full Wide Stamp case.  Kylie Bertucci has given us permission to Love It Chop It. 

 

Buffalo Check Goes Plaid - One Hour Card Class 082 - OHCC082

Stamps: Winter Woods, Suite Seasons (2016 Holiday), Buffalo Check.

Cardstock: Shaded Spruce, Merry Merlot (Cherry Cobbler), Very Vanilla, Joyous Noel 6” x 6” Glimmer Paper in Copper (Holiday 2018).

Ink: Shaded Spruce marker, Shaded Spruce, Merry Merlot (Cherry Cobbler).

Tools: Ruler, Stamparatus, bone folder, purchased envelope, dimensionals, Tombow adhesive, snail adhesive, regular and mini glue dots, Merry Merlot and Copper 5/8” Reversible Ribbon (Holiday 2018), Subtle embossing folder, Silicone Craft Sheet.

Punches/Dies: Sprig Punch, Stitched Shapes Framelits, Layering Ovals Framelits, Thinlits Die.

Jodi’s card gave me a start for my card.  I really wanted to use the new Glimmer Paper in Copper and the Reversible Ribbon (both from the Holiday 2018) on my card. 

I cut a Very Vanilla panel at 5” x 4” and again at 3-1/4” x 4”.

Lightly spritz the back of the smaller Vanilla panel with water, then blot it with a paper towel. While it was still damp, run it through the Subtle embossing folder.

Used the Stamparatus to position and stamp the Buffalo Check on the bigger Vanilla panel.  Drew the lines with the marker as Jodi shows then I taped the Vanilla panels together and trimmed it to 3-3/4” x 4”.

Stamps: Winter Woods, Suite Seasons (2016 Holiday), Buffalo Check.

Cardstock: Shaded Spruce, Merry Merlot (Cherry Cobbler), Very Vanilla, Joyous Noel 6” x 6” Glimmer Paper in Copper (Holiday 2018).

Ink: Shaded Spruce marker, Shaded Spruce, Merry Merlot (Cherry Cobbler).

Tools: Ruler, Stamparatus, bone folder, purchased envelope, dimensionals, Tombow adhesive, snail adhesive, regular and mini glue dots, Merry Merlot and Copper 5/8” Reversible Ribbon (Holiday 2018), Subtle embossing folder, Silicone Craft Sheet.

Punches/Dies: Sprig Punch, Stitched Shapes Framelits, Layering Ovals Framelits, Thinlits Die.

Jodi’s card gave me a start for my card.  I really wanted to use the new Glimmer Paper in Copper and the Reversible Ribbon (both from the Holiday 2018) on my card. 

I cut a Very Vanilla panel at 5” x 4” and again at 3-1/4” x 4”.

Lightly spritz the back of the smaller Vanilla panel with water, then blot it with a paper towel. While it was still damp, run it through the Subtle embossing folder.

Used the Stamparatus to position and stamp the Buffalo Check on the bigger Vanilla panel.  Drew the lines with the marker as Jodi shows then I taped the Vanilla panels together and trimmed it to 3-3/4” x 4”.